Jump to content
  • Welcome to SEFP!

    Welcome!

    Welcome to our community forums, full of great discussions about Structural Engineering. Please register to become a part of our thriving group or login if you are already registered.

Word Spreading This Forum


Badar (BAZ)
 Share

Recommended Posts

Salaam everbody! We know more, when we share our knowledge,and this forum is platform where we can share and get knowledge relating to structural engineering. Umar makhzomi has done good job in spreading this forum,having posted an ad on facebook. But we need to do more,as facebook is not enough.More people should be inlvolved in this forum which will help us discuss our problems related to structural engineering and eventually can help us in becoming better engineers.

Please give your suggestions as to how can we publicize this forum.

cheers.

Link to comment
Share on other sites

Salaam everbody! We know more, when we share our knowledge,and this forum is platform where we can share and get knowledge relating to structural engineering. Umar makhzomi has done good job in spreading this forum,having posted an ad on facebook. But we need to do more,as facebook is not enough.More people should be inlvolved in this forum which will help us discuss our problems related to structural engineering and eventually can help us in becoming better engineers.

Please give your suggestions as to how can we publicize this forum.

cheers.

Rightly said, this community can be a source of great information and as mentioned before somewhere in the forum, in "Uplifting" Structural Design Practise in Pakistan. It is the only way. Lets spread the word.

Link to comment
Share on other sites

Well im not in Pakistan but i have asked my friends in pak to start involving but due to i think lack of experience or having no job they are not posting here. Anyways i can bring other nationals here but they are much experienced and the pakistani ccommunity i interact with here is also experienced in terms of structural knowledge. Thats y i am waiting this forum to grow then they could really participate here bcz they are all seniors. they will not find much interest.

Anyways i am trying...everyone should!

Link to comment
Share on other sites

Well im not in Pakistan but i have asked my friends in pak to start involving but due to i think lack of experience or having no job they are not posting here. Anyways i can bring other nationals here but they are much experienced and the pakistani ccommunity i interact with here is also experienced in terms of structural knowledge. Thats y i am waiting this forum to grow then they could really participate here bcz they are all seniors. they will not find much interest.

Anyways i am trying...everyone should!

I am not agreed with you Rana. There are most experienced structural engineers in Pakistan but mostly the engaged ones doesn't have much time to use net due to tough schedules I personally know some of them. Where as the jobless or little less experience engineers can be key players if we introduce a job forum and invite companies or share the vacant jobs all over the world.

We will have to go extra mile for the promotion of the site as well the structural engineers.

Link to comment
Share on other sites

Salaam everbody! We know more, when we share our knowledge,and this forum is platform where we can share and get knowledge relating to structural engineering. Umar makhzomi has done good job in spreading this forum,having posted an ad on facebook. But we need to do more,as facebook is not enough.More people should be inlvolved in this forum which will help us discuss our problems related to structural engineering and eventually can help us in becoming better engineers.

Please give your suggestions as to how can we publicize this forum.

cheers.

It will be great if we make page/profile instead of sharing on facebook, twitter, linkedin, and youtube hopefully we will get the best results. Further we can invite the structural engineers from all over the world and share more knowledge and prove that Pakistani Engineers are best. One more thing which we can do is to invite the student of engineering universities of Pakistan.

Link to comment
Share on other sites

  • 7 months later...
  • 1 year later...

Assalam-o-alaikum!

 

Dear colleagues!

 

This forum is really a great platform for us, to share our knowledge and field experience with each other. Moreover, this forum can also help a lot in improving overall standard of technical know-how of our structural engineers, by providing them quality advice and guiding them to international standards of structural design and construction practices. IMO, this latter aspect is not only very important, but also our moral obligation as well as a national duty.

 

But, this will be possible and practicable only, when more and more engineers join this forum, and contribute their knowledge and experience on regular basis. And, this is what this thread is meant for.

 

However, we are probably missing an important aspect in our discussion, that can attract engineers to join and/or visit this forum more frequently.   And, that is, replying to their queries early and more frequently.

 

It is natural that a normal person is much more attracted to an early reply to his/her questions, rather than overall level of advice at a particular forum. On the other hand, no response to a query for a long time, will most probably disappoint  the originator, resulting in lack of interest. 

 

What I am trying to emphasize is, that we (especially the moderators and senior/more experienced members) should NOT ONLY visit the forum regularly, BUT ALSO should reply the questions raised/queries made in various sections AS EARLY AS POSSIBLE. (I myself always try to act on this principle, in cases where I can help.)

 

IMHO, this policy will not only attract more engineers, but will (later on) also build their confidence in this forum, as a major source of structural engineering knowledge and advice. 

 

Regards. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • Hi there,
      I am interested in performing "Performance Based Design" for a 20 story building. 
      I'll be performing "Non-Linear Static Pushover Analysis" for my model. Until now, I have decided to go with "Displacement Co-efficient method". I will be using ETABS 2017 for performing Pushover Analysis. While assigning plastic hinges, I have an option of using ASCE 41-17 (Seismic Evaluation and Retrofit of Existing buildings". I would like to know what would be a better estimate for relative distances for plastic hinges in case of beams, columns. Any input concerning assignment of hinges to beams, columns and shear walls is highly appreciated. Normally it's taken 0.05 and 0.95 or 0.1 and 0.9. What's your opinion on this?
      Secondly, it would be great if someone can recommend me a book or some good source to understand how to characterize building using performance levels. Any sort of help is appreciated.
      I have recently graduated and joined a structural design firm, so kindly guide me, considering me a beginner.

       
      • 2 replies
    • *SEFP Consistent Design*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Pile Design*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Doc No: 10-00-CD-0007*<br style="background-color:#ffffff; color:#272a34; font-size:14px; text-align:start">*Date: April 16, 2018*

      1.1. FUNCTION OF JOINT

      Beam-column joint must transfer the forces, such as moment, shear and torsion, transferred by the beam to the column so that the structure can maintain its integrity to carry loads for which it is designed.

      Another function of the beam-column joint is to help the structure to dissipate seismic forces so that it can behave in a ductile manner.

      1.2.WHY DO WE CARE

      During an extreme seismic event, the code-based structure is expected to maintain its load-carrying capacity for gravity loads even after the structure deforms into inelastic range so that it does not pose any life safety hazard. Hence, the joint can go through significant degradation of strength and stiffness, and if it fails in shear, or anchorage, the life-safety objective of code cannot be achieved.

      1.3.CONSEQUENCES OF FAILURE


      1.4.THINGS TO CONSIDER FOR BEAM COLUMN JOINT

      Longitudinal bars of beams, or slab, must be able to develop their yield stress, so that the beam/slab can transfer moment to joint. It means that longitudinal bars must have adequate development length for hooked bars. This implies that the size of the column must be such that bars can develop their tensile forces. If bars can transfer moment, they can also transfer shear as far as monolithic construction is concerned.


      The shear strength of the joint must enable the transfer of moment and shear through it.



      The joint should be Constructible: Congestion of reinforcement is the main concern.

      1.5.DESIGN SHEAR FOR BEAM COLUMN JOINT

      The design shear for beam-column joint depends upon the relative strength of beam and column at the joint.

       
      • 4 replies
    • *Comments/Observations regarding modelling in ETABS*

      *Doc No: 10-00-CD-0006*

      *Date: May 06, 2017*

      Some of the observations made during extraction of results from ETABS (v 9.7.4), for design of reinforced concrete members, are being share in this article.,

      1) Minimum Eccentricity

      ETABS always considers the minimum eccentricity for selecting the design moment of columns irrespective of the probable behavior of the column, whether short or long column. See section 10.10.6.5 and its commentary of ACI 318-08 which deals with minimum eccentricity of long columns. You should always check the design moments that ETABS uses for columns if you want to bring down the cost of construction.

      2) Unbraced/ Braced Preference

      ETABS always performs analysis of frame as if it is un-braced. You should investigate if the storey under consideration is braced, or un-braced (10.10.5.2), and decide appropriate design moments of columns.

      3) Time Period

      ETABS has a tendency to select a time period of the building that is considerably less than the value obtained by the approximate method, Method A, of the section 1630.2.2  of UBC 97. To quote the FEMA 451 document: ''Because this formula is based on lower bound regression analysis of measured building response in California, it will generally result in periods that are lower (hence, more conservative for use in predicting base shear) than those computed from a more rigorous mathematical model". So, there is no need to use the value of time period that is lot less than Ta. One should always check the time period used by the software; ETABS can overestimate the seismic force by more than 2 times.

      Visit the forum link to read the complete article.
      Link: http://www.sepakistan.com/topic/2300-commentsobservations-regarding-modelling-in-etabs/
      • 0 replies
    • The minimum amount and spacing of reinforcement to be used in structural floors, roof slabs, and walls for control of temperature and shrinkage cracking is given in ACI 318 or in ACI 350R. The minimum-reinforcement percentage, which is between 0.18 and 0.20%, does not normally control cracks to within generally acceptable design limits. To control cracks to a more acceptable level, the percentage requirement needs to exceed about 0.60% (REFRENCE ACI COMMITE REPORT 224R-01)



       

       



       

       

      So according to above statement , should we follow 0.60%, to be on more safe side??



       
      • 12 replies
    • Dear Sir/Madam,

      This email is an invitation for the participation in the First South Asia Conference on Earthquake Engineering (SACEE-2019) which will be held on 21-22 February 2019 in Karachi, Pakistan. This conference is the inaugural event in this series of conferences which has been constituted under the auspices of South Asia Earthquake Network (SHAKE). The organisers of the conference include NED University, University of Porto, University of Fuzhou, University Roma Tre and Institution of Engineers Pakistan. The conference website can be visited at http://sacee.neduet.edu.pk/.

      Please note that world leading earthquake engineering experts have confirmed their participation in the conference. These include Prof Abdelkrim Aoudia (Italy), Prof Alper Ilki (Turkey), Dr Amod Mani Dixit (Nepal), Prof Bruno Briseghella (Italy), Prof George Mylonakis (UK), Prof Khalid Mosalam (USA), Prof Humberto Varum (Portugal) and many others. The presence of these distinguished experts allows you to exchange your work/issues with them and discuss possibility of any future collaboration. Please note that participation in the conference is strictly based on registration. Early registration in different categories at reduced rates are available till 10 December 2018. Please visit the conference website to see the details and the link for registration.

      If there are any queries, please do not hesitate to contact the Conference Secretary at the following address

      Prof. Muhammad Masood Rafi
      Conference Secretary- SACEE-2019
      Chairman
      Department of Earthquake Engineering
      NED University of Engineering & Technology Karachi, Pakistan.
      Phone: 0092-21-992-261261 Ext:2605
      Email: rafi-m@neduet.edu.pk
    • What is the Minimum reinforcement For Precast Pile  according to different codes (ACI,BS)??  Pile length is 40 times of pile least dimension . 
      • 1 reply
    • Dear members, I am working on a 10 storied rcc factory building with one basement,  where floor loads are in general 125 psf(Live) . but there are 2 warehouse in the building at ground floor & 10th floor where the Live load of stacked materials are 450psf. I have modeled it and analysed in ETABS. After analysis, seeing the floor displacement for seismic load,  i am in big shock to see the pattern. the displacement pattern suddenly increased hugely & then got normal . if the warehouse load created problem, then why it effected only Ground floor level, not the 10th floor! Please tell me how can i solve it. 
      • 1 reply
    • Asalamualaikum all,

      I have columns which are conflicting with the underground water tank as shown in figure.
       

      So I have decided to make underground water tank base slab as a footing for column. So I import etabs model to safe and just take uniform water load on base slab and point load from columns.

      This is the residential house. The BC is 2tsf. But SAFE is showing tension on the base slab and the thickness from punching is 30''. I believe that thickness is too high. What can be the error? Is this approach is correct for design base slab of ugwt to carry load of two edge columns?
      • 11 replies
    • SAFE perform iterative uplift analysis,any one having experience how to check the results of this analysis???what is the purpose and scope of this analysis???
      • 15 replies
    • Shear wall design
      AOA 

      i am facing problems in shear wall design .what are the pier and spandral ?what will be the difference when we assign pier or spandral? without assigning these the shear wall design is incomplete .

      i am taking about etabsv16

      someone have document about shear wall design plz provide it 

      thank you

       
      • 13 replies
  • Tell a friend

    Love Structural Engineering Forum Of Pakistan? Tell a friend!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.